Microtek Isolators are high grade switch disconnectors used generally at both ends of circuit breaker. They make carry and break currents under normal circuit conditions including overload or specific abnormal circuit conditions such as short circuit for a specified time.
PROTECT YOUR ASSETS WITH MICROTEK ISOLATORS
The MIcrotek Isolator is used to block high cables and slow speeds so that the expansion of one part of the system does not interfere with or destroy other parts. Visual separation uses an LED (Light Emitting Device) and a transistor that blur the image to transmit information across the separation barrier - usually an air gap; in other words, data is transmitted using light instead of electrical signals, so there is no physical connection between the causes and the data lines, thus eliminating earth's ground problems and effectively preventing electrical surges and spikes from destroying other parts of the system. In addition, because visible separation uses light to transmit information to the edge of isolation, it also benefits the opportunity to protect itself from electrical and magnetic fields. This makes visual separation a viable solution in industrial areas where there may be significant electrical or magnetic fields.
State-of-the-art design – Microtek design is aesthetically superior and built in with the features like center dolly, clear marking of the technical parameters, On/Off symbols along with the brand and the range name. This marking also helps to enhance the design appeal of this range.
Exceptional Endurance – The products have been tested at high electrical mechanical endurance, with the ambient temperature of -5 °C to +55 °C.
Contact Indication Window – The products are designed by considering user friendliness into mind. The visual indications helps users to identify the positions of Isolator. RED = ON, Green = OFF.
Bi Connect Terminals – The terminal size in devices adapts convenience and flexibility while wiring. The 25/35 sq. mm terminals are designed to hold cables tightly to avoid loose connection. The bi-connect terminals provides flexibility by allowing the lines to be connected through wires and bus bars.
Protection IP-2O – We realize the importance of safety and have designed the range in such a way that no live parts are exposed to human contact, thus making devices safe to use.
Dual Position Clamp – The dual position clamps help in easy mounting and unmounting of the Isolator.
Air Flow Channel – The special air flow channels on the Isolators allow the air to come out and help to maintain the temperature inside while Isolators/MCBs are adjoined with each other in the DBs
MICROTEK ISOLATOR - DOUBLE POLE ( ISO 40A DP Pro )