Microtek OXYFLOW 5L is an oxygen concentrator, a type of medical device used for delivering oxygen to individuals with breathing-related disorders. Individuals whose oxygen concentration in their blood is lower than normal often require an oxygen concentrator to supplement the same.Microtek OXYFLOW 5L is designed by keeping maintenance costs in mind. For example, OxyFlow 5L has just two filters. The external filter can be changed in few minutes without special skills or tools and the internal micro disk filter is simply checked during routine maintenance procedures.OXYFLOW 5L concentrators are backed by value-added tools. From in-person and online training to financing options, you have what you need to succeed. Since Microtek offers a wide range of health care products and comprehensive support, we can be the source for many of your product needs.
Note - If the product is broken/damaged it will not be covered in the warranty. If the product is out of warranty, there is no replacement service and customers should contact customer care number no. given to the product. Call between 10 a.m. to 6 p.m.
1.1 - Position the machine 1 to 2 feet (0.30 to 0.61 m) from the wall and furniture. 1.2 - Connect your humidification bottle if one is prescribed. 1.3 - Attach your oxygen tubing to either the humidification bottle or an adapter. 1.4 - Make sure your air filter is in place.
2. Turning It on OXYFLOW 10A
2.1 - Start your oxygen concentrator at least 15-20 minutes before using it 2.2 - Plug it into a grounded outlet that’s not in use. 2.3 - Switch the power button to the “on” position & Listen for the Alarm
3. Adjusting Your Oxygen Flow Rate
3.1 - Turn the knob or switch until it points to your prescribed number. 3.2 - Avoid using more or less oxygen than your doctor has prescribed.
4. Putting on Your Mask or Nasal Cannula
4.1 - Check your tubing for kinks or bends. 4.2 - Put your mask over your face for low levels of oxygen. 4.3 - Fit your nasal cannula upward into your nostrils for high levels of oxygen. 4.4 - Breathe through your mask or nasal cannula. 4.5 - Switch the power to "off" when the machine isn't in use
5 LPM (Litre Per Minute)
Flow Meter Range
0 to 5 LPM
Temperature Operating Range
5 degree to 40 degree Celcius
Sound Level Produced
220V, 50 HZ
Switch Times, Operating Pressure, Present Working Time, Accumulated Working Time & Purity Data Indicator
High & Low Pressure Alarm, Low Oxygen Purity Alarm