Microtek UPS LUXE Sinewave Model Based on Micro Computer Based INTELLI PURE SINWAVE UPS is Designed Using Latest State-of-the-art Technology for Better performance and High Reliability. The INTELLI Pure Sinewave Technology used enhances the life of the battery and Minimum effort has to be put for maintenance.
STEPS FOR UPS INSTALLATION
TO BE DONE BY A COMPETERNT & KNOWLEDGEABLE PERSON.
Switch OFF The Supply to the Distribution Point to which the UPS Unit is to be connected.
For extra safety also remove the fuses from the line. Make absolutely sure with measurement that there is no power.
A readily accessible disconnect devices must be incorporated in all fixed input wiring. The disconnect devices shall have a contact separation of at least 3mm. the UPS has automatic back feed isolation but for extra safety a warning label can be added on all primary power isolators installed remote from the UPS to warm electrical maintenance personnel.
Check the Building wiring, improper wiring will not prevent the UPS from operating but will limit its protection capability. Improper building wiring could result in equipment damage that is not covered in warranty.
Connect the battery/Batteries to UPS as per its requirement.
Keep the front switch of UPS on OFF Position.
Connect the Load wire to the right hole of Output Socket Located on The rear Panel of UPS.
Switch ON the Front Switch of the UPS.
Connect AC Input Wire to commercial mains socket.
India’s Most Smartest & Intelligent LCD UPS with Micro Computer Inside.
INTELLI Pure Sinewave Output safe for sensitive appliances & Noiseless Operations.
5 Stage Intelligent Battery charging algorithm.
Advance circuits Breaker for Protection.
Support Wide Battery charging for high power-Cut area.
Standard charging option for normal power-cut area.
Digital Single Controller / Micro-computer Inside: Micro Computer Based Intelligent control Design